Page 84 of 863      News per page:1020

04.09.2020 (617 Clicks)

Medusa Mining: Management Changes

Medusa Mining Limited advises that Patrick Warr will assume the role of Chief Financial Officer (“CFO”) from 7 September 2020. Mr Warr will be replacing current CFO Peter Alphonso who will retain the role of Company Secretary.

04.09.2020 (897 Clicks)

Geobrugg launches Remote Monitoring Service

In September 2020 Geobrugg GUARD for remote monitoring of barriers enters the European market. Developed for the most adverse environmental conditions, GUARD monitors rockfall and debris flow barriers, avalanche barriers, or similar systems.

02.09.2020 (691 Clicks)

GHH sets new Standards with biodegradable Hydraulics

Environmental protection in rock logistics

First super-clean Stage V diesel, then electric drives and now flame-retardant and biodegradable hydraulic fluids: GHH, the manufacturer of civil engineering and mining machinery, is setting an impressive pace in protecting people and the environment.

01.09.2020 (747 Clicks)

Change of management at BAUER Resources GmbH – Tobias Bangerter to become Managing Director

Starting September 1st, Tobias Bangerter will join the Management Board for BAUER Resources GmbH as a new member, replacing Peter Hingott who has served as Chairman of the Management Board for the past four years alongside his role as member of the Management Board of BAUER AG. At the same time, Dr. Roman Breuer will take over as Chairman of the Management Board.

01.09.2020 (693 Clicks)

Queensland can count on Resources: QRC

The Queensland Resources Council (QRC) has launched an unprecedented four-week media campaign in the lead-up to the State Election to emphasise the economic and job creation importance of the mining and gas industry to the State’s COVID-19 recovery.

01.09.2020 (659 Clicks)

Outokumpu – Change in Outokumpu’s Leadership Team

Outokumpu – Change in Outokumpu’s Leadership Team

Reeta Kaukiainen, Executive Vice President, Communications, Marketing and Investor Relations has decided to pursue her career outside Outokumpu. She will continue in her current role until the end of September. With this change, Outokumpu’s communications, marketing and IR will continue as separate functions within the Outokumpu organization.

01.09.2020 (669 Clicks)

HYBRIT: SSAB, LKAB and Vattenfall to start up the world’s first pilot plant for fossil-free steel

Today, SSAB, LKAB and Vattenfall are taking a decisive step toward fossil-free steelmaking with the start-up of HYBRIT’s globally unique pilot plant for the production of fossil-free sponge iron. Swedish Prime Minister Stefan Löfven started up the plant together with Isabella Lövin, Minister for Environment and Climate and Deputy Prime Minister, Martin Lindqvist, President and CEO of SSAB, Jan Moström, President and CEO of LKAB and Magnus Hall, President and CEO of Vattenfall. SSAB, LKAB and Vattenfall aim to create a complete value chain for fossil-free steel.

01.09.2020 (827 Clicks)

FILO Mining (Lundin group) Board Changes

Filo Mining Corp. announced the appointment of Ms. Carmel Daniele to the Board of Directors of Filo Mining, in replacement of Mr. Paul McRae who has resigned.

27.08.2020 (748 Clicks)

Haver & Boecker Niagara Offers Variety of Fine Screen Media Options for Fast Delivery

Haver & Boecker Niagara offers a wide range of fine screen media options for a variety of applications including frac and silica sand, salt, perlite, potash, roofing granules and steelmaking coal. The portfolio features options for cut sizes as small as 120 mesh and for temperatures as high as 600 F (315 C). Haver & Boecker Niagara customers also benefit from fast delivery; most products are ready to ship in two to three days from the North American production facility.

27.08.2020 (672 Clicks)

Wacker Neuson: Efficient Material Transport for every Area of Application

- The new wheel loaders WL110 and WL34 from Wacker Neuson

Wacker Neuson offers the right wheel loader for any type of application, from the emission-free electric wheel loader in the 2-metric ton class to the all-rounder WL34 and up to the 10-metric ton class. The largest model WL110 and the wheel loader WL34 have been available since April.

Wheel loaders are an indispensable part of many fleets and are true multi-talents in a wide variety of application areas such as, for example, gardening and landscaping and municipalities. For all application cases, Wacker Neuson has the right solution, now with 14 different wheel loader models, from two to eleven metric tons operating weight.

WL110 – for heavy material handling

Higher, faster, stronger. The wheel loader WL110 is ideally suited for heavy material handling. This is ensured by a combination of a powerful 156 HP engine and a large hydraulic pump (180 l/min). With the heavyweight by Wacker Neuson – with a tipping load of up to 7.7 metric tons and a bucket capacity of 1.8 cubic meters – companies are raising their productivity. For example, for material handling in building and civil engineering, municipalities, or gravel plants, where gravel breakers must be loaded with large amounts of heavy gravel, the operators benefit from the higher tractive forces and travel speeds of the machine, which the innovative transmission ecospeedPRO, a variable hydrostatic high-speed transmission, makes possible. The powerful wheel loader WL110 is additionally equipped with an articulated joint and an oscillating axle in the rear, which make it on the one hand maneuverable and compact, and on the other guarantees optimal traction, for example in gravel plants.

All-round visibility and comfort cabin for increased efficiency

For an even safer and more efficient working principle during material transport, the large cabin of the WL110 ensures that: The operator always has the optimal view of the attachment and its surroundings, which for one makes working safer, and additionally results in time and cost savings. Also, the ergonomic comfort cabin offers the operator plenty of legroom, a practical layout of operator's controls and a comfortable operator’s seat. The digital 7” display gives him the most important information at a glance: Besides the standard displays, the active functions are also displayed in the cockpit, for example the electric functions that are switched on. The “Jog Dial” control element enables the operator to carry out sensitive work while saving resources. When necessary, Jog Dial can be used to manually set the flow rate of the hydraulic oil and track it on the display. This way, every attachment can be operated with the individually required amount of hydraulic oil, which ensures increased efficiency and protects the attachments from overloading.

Time-tested and proven all-rounder with higher performance

With the new model of the time-tested and proven wheel loader WL34, Wacker Neuson offers an even more performance-efficient all-rounder suitable for a wide range of transport work. With the update of the machine, the wheel loader can be used even more productively: The increased tipping load of up to three metric tons makes the wheel loader particularly sturdy and the work thus even safer. Customers simultaneously benefit from the increased performance along with the usual compact dimensions: For example, the new model also has a clearance height of under 2.2 meters (with a low operator's canopy), which also makes it ideal for applications indoors or in industrial buildings, garages, road and highway construction, and gardening and landscaping. In addition, the wheel loader is equipped as standard with a spacious comfort cabin, ensuring fatigue-free work. Companies also benefit from short and efficient maintenance times due to the practically arranged service accesses.

About Wacker Neuson

Wacker Neuson – all it takes! Wacker Neuson makes this promise to customers worldwide with a comprehensive product range of construction machines and equipment, spare parts and services. Among other things, the product portfolio includes internal and external vibrators for concrete compaction, vibratory screeds for concrete surface finishing, rammers, vibratory plates and rollers for soil compaction, demolition and cutting equipment, lighting, generators, pumps and heaters as well as excavators, wheel loaders, telehandlers, skid steer loaders and dumpers in the field of compact construction machines. Wacker Neuson has always owed its leading market position to unconditional customer orientation as well as the reliability and power of innovation of its products. With its own sales and service organizations in more than 35 countries, 7 international production sites and numerous partner locations for sales organization and service, Wacker Neuson has a comprehensive presence. In addition, Wacker Neuson offers services that meet the diverse requirements of its customers. Companies from the main construction industry, gardening & landscaping, municipalities and industry, among other sectors, therefore rely on the innovative solutions of Wacker Neuson. The brand is supported by the Wacker Neuson Group, a corporation with more than 5,500 employees worldwide and a turnover of EUR 1.9 billion in 2019.

Source: Wacker Neuson