GeoResources Journal for Resources, Mining, Tunnelling, Geotechnics, Equipment and Energy
For detailed results feel free to use our search tool.
15. July 2015
( 95791 Clicks / 52761 Downloads )
ISSN: Print 2364-8422 / Online 2364-8430
Here is the table of contents. To download the GeoResources Journal click on individual headlines of the articles!
“The industrial value creation chain requires a continuous and reliable raw material supply in the long term. German mining activities abroad actively contribute towards securing natural resources for Germany and the European Union. We aim to nurture and encourage them as well as continuing to expand medium-sized mining enterprises at home and abroad in keeping with requirements”.
Creative geotechnical Solutions for Renovating the Dresden Old Masters Picture Gallery in the Zwinger – Part 1: Foundations for a new Freight Elevator
Renovating the Old Masters Picture Gallery in the east wing of the Zwinger in Dresden also represents a sophisticated task in geotechnical terms. Part 1 of this report provides a few brief general details on the renovation project. It then deals with how the piles required for the freight elevator were installed. The tricky subsoil, conservation and the fact that the museum had to remain open were special challenges.
The availability of points during the winter months is of key significance for rail services running smoothly. In order to ensure that the switch blades, the moving parts of switches, do not freeze, they are kept free of snow and ice by means of heating systems. Apart from conventional electric and gas-operated heating systems a geothermal switch heating system that does not require an external power source is now available, which is approved by the Federal Railway Authority in Germany (EBA). This new technology opens the way for energy-conscious and low-cost heating.
Mining is an industry in transition. Mobile technology can help to increase the efficiency and to acquire and relay data from anywhere. Thus, mobile computers and tablets have to address mobile computing requirements in harsh environments.
The 57 km long Gotthard Base Tunnel was produced in five contract sections with three intermediate points of attack. The Sedrun intermediate point of attack consists of two blind shafts some 820 m deep, which could only be reached via a roughly one kilometre long access tunnel. The complex, tricky general conditions and the high demands placed on the availability of the shaft hoisting system were and still are a particular challenge for building and operating the facilities. This report in Part 1 deals with constructing and operating the shaft hoisting system in the form of a rock, material and manriding shaft and installations to cool the air in the Faido tunnel section during the excavation phase. Part 2 examines the dismantling and modiication of the shafts and the functions of the ultimate hoisting facilities in the Sedrun shafts during the rail tunnel’s operational phase.
A coal mine in Australia is the first in the nation to utilize Tunnel Boring Machines (TBM) for mine access. The highly successful debut of mechanized mining at the Anglo American Coal Mine ultimately achieved rates 14 times faster than the traditionally used roadheader method. Not only that, but the TBM was a unique type of hybrid machine known as a Crossover (XRE) TBM – capable of excavating in both hard rock and EPB modes. This paper will discuss the challenges and triumphs of the Crossover TBM excavation at the Grosvenor Coal Mine, and the potential for TBM usage in mines worldwide..
The chrome ore reserves in Kazakhstan are numbered among the biggest and richest anywhere in the world. Tricky geological conditions involving major convergences have to be countered by heading technology tried-and-tested in Germany. Towards this end, two German mining enterprises founded a subsidiary in Kazakhstan in 2011. In October 2012, it was awarded a contract for driving 4,150 m of headings. On August 15, 2013, initial blasting took place at a depth of some 900 m for the “Producing a headway at level –480 m at the ‘10th Anniversary of Kazakhstan’s Independence Mine’ project”. Following a difficult start-up phase in 2013 and a good start to 2014, around 1,250 m of heading with bends, station areas and roadway junctions had been produced until Mid April 2015.
Cutting-loading machines that are currently manufactured have capabilities consistent with the averaged operating conditions. Therefore, sometimes, especially when coal beds contain difficult-to-break dirt beds and large hard inclusions, capability of cutter-loaders falls short of the standards accepted for the machine output, dynamic load, coal sizing and reliability. This is in some measure justified in case of a low face output. However, in longwalling or horizonface mining, it is required to select each cutting-loading machine individually, from the view point of both enhancement of productivity and improvement of coal sizing. This first of all relates to cutting bits that come in direct contact with coal and generate overall and dynamic loading of the machine. In connection with this, the research has been undertaken aimed at creation of database on coal cutability on the one hand and at development of a procedure and programme support for choosing parameters of working organs of cutter-loaders meant for specific operating conditions.
12.12.2023 - 13.12.2023
14.12.2023 - 15.12.2023
World’s longest Railway Tunnel Project – supported by innovative Conveyor Digitalisation and reliable Engineering
17. October 2022 (2002 Clicks)
The consortium BTC Brennero Tunnel Construction and the Hosch Group jointly delivered on a world-class tunnelling project by combining excellent engineering with the innovative remote monitoring system Hoschiris Discover.
27. September 2018 (13344 Clicks)
Das Buch 3 der Reihe „Dokumentation der technischen Entwicklung bei der RAG“ stellt die Evolution der Vorleistung in den vergangenen 50 Jahren dar. Da sie den Zugang zur Lagerstätte schafft, ist sie die Grundvoraussetzung zur Gewinnung des Rohstoffs Kohle und bildet die Grundlage für den langfristig sicheren und leistungsfähigen Betrieb eines Bergwerks.
27.11.2023 (562 Clicks)
22.11.2023 (164 Clicks)
24.11.2023 (149 Clicks)